Atlantic.Net Blog

How to Install Nginx, MySQL, PHP (LEMP) stack on Ubuntu 20.04

NGINX Car by Walker Cahall

Verified and Tested 06/13/21

Introduction

This how-to will show you how to install LEMP on a Ubuntu 20.04 cloud server. LEMP is a web service stack that consists of a Linux operating system, Nginx (pronounced “engine-x”), MySQL, and PHP. The main difference between LAMP and LEMP is that LAMP uses Apache, and LEMP uses Nginx. LEMP has been gaining popularity in the last few years because it excels in speed and scalability.


Installing LEMP

First, we want to make sure that your server is up to date by running the commands:

sudo apt update
sudo apt upgrade

Note: Depending on your installation you may need to remove apache2. You can do that by running the commands:

sudo apt remove apache2*
sudo apt autoremove

 

Installing Nginx

To install Nginx, use the command:

sudo apt install nginx

When it asks “Do you want to continue?”, hit Enter.

Start the Nginx service with the following command:

sudo systemctl start nginx

We can now test Nginx by going to your hostname or IP address in your browser’s address bar.

In our example, 192.168.0.192 is the IP address. So in our browser, we would go to http://192.168.0.192.

You should see a web page that looks like the image below.

This example is the default nginx web page on Ubuntu 20.04

Now that Nginx is installed, we can move on to installing MySQL.

Installing MySQL

Install MySQL with the command:

sudo apt install mysql-server

When it asks “Do you want to continue?”, hit Enter to finish the installation.

Now that MySQL is installed we need to do the MySQL secure installation by running the command:

sudo mysql_secure_installation

Enter your MySQL root password. When it asks “Change the root password?”, type “N” followed by Enter. The rest of the questions are up to you. For standard installations, you can hit Enter for the defaults. It will look similar to the code box below.

NOTE: RUNNING ALL PARTS OF THIS SCRIPT IS RECOMMENDED FOR ALL MySQL
      SERVERS IN PRODUCTION USE!  PLEASE READ EACH STEP CAREFULLY!

In order to log into MySQL to secure it, we'll need the current
password for the root user.  If you've just installed MySQL, and
you haven't set the root password yet, the password will be blank,
so you should just press enter here.

Enter current password for root (enter for none):
OK, successfully used password, moving on...

Setting the root password ensures that nobody can log into the MySQL
root user without the proper authorisation.

You already have a root password set, so you can safely answer 'n'.

Change the root password? [Y/n] n
 ... skipping.

By default, a MySQL installation has an anonymous user, allowing anyone
to log into MySQL without having to have a user account created for
them.  This is intended only for testing, and to make the installation
go a bit smoother.  You should remove them before moving into a
production environment.

Remove anonymous users? [Y/n]
 ... Success!

Normally, root should only be allowed to connect from 'localhost'.  This
ensures that someone cannot guess at the root password from the network.

Disallow root login remotely? [Y/n]
 ... Success!

By default, MySQL comes with a database named 'test' that anyone can
access.  This is also intended only for testing, and should be removed
before moving into a production environment.

Remove test database and access to it? [Y/n]
 - Dropping test database...
ERROR 1008 (HY000) at line 1: Can't drop database 'test'; database doesn't exist
 ... Failed!  Not critical, keep moving...
 - Removing privileges on test database...
 ... Success!

Reloading the privilege tables will ensure that all changes made so far
will take effect immediately.

Reload privilege tables now? [Y/n]
 ... Success!




All done!  If you've completed all of the above steps, your MySQL
installation should now be secure.

Thanks for using MySQL!

 

Now that MySQL is installed, we can now install PHP.

Installing PHP

Install PHP with the following command:

sudo apt install php php-fpm php-mysql

When it asks “Do you want to continue?”, hit Enter.

For Nginx to work with PHP correctly, we need to edit an Nginx configuration file. In this how-to, we are going to use a simple Nginx config file.

First, we need to move the original configuration file to a new file name. Run the command:

sudo mv /etc/nginx/sites-available/default /etc/nginx/sites-available/default.old

Using a text editor of your choice, we are going to make a file called default in /etc/nginx/sites-available. For nano use the command:

sudo nano /etc/nginx/sites-available/default

Copy the following into your text editor:

server {
        listen       80;
        server_name  your_site_name.com;
        root /usr/share/nginx/html;
        index index.php index.html;

        location / {
                try_files $uri $uri/ =404;
        }

        error_page 404 /404.html;
        error_page 500 502 503 504 /50x.html;

        location = /50x.html {
                root /var/www/html;
        }

        location ~ \.php$ {
                try_files $uri =404;
                fastcgi_pass unix:/var/run/php/php7.0-fpm.sock;
                fastcgi_index index.php;
                fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;
                include fastcgi_params;
        }
}

In nano, to exit and save, hit Ctrl+x , type “y”, and then Enter.

Since we made changes to the configuration file, we need to restart Nginx, by running the command:

sudo systemctl restart nginx

We are now going to make a simple PHP page to test.

Using a text editor of your choice, we are going to create a file called info.php in /usr/share/nginx/html/.

sudo nano /usr/share/nginx/html/info.php

Copy the following into your text editor.

<?php
phpinfo();
?>

In your browser, you can go to http://Your-Hostname/info.php or http://Your-IP-Address/info.php. As above, in this example, we would use http://192.168.0.192/info.php.

You should see a web page similar to the one below.

Display PHP information

Once you are done testing, it is a good idea to remove the info.php file, since it may give a potential attacker information that can be used to craft a specific attack against your server. To do that run the command:

sudo rm /usr/share/nginx/html/info.php

Congratulations, you have installed LEMP on Ubuntu 20.04. Thank you for following this how-to. Please check back for more updates.

Get a $250 Credit and Access to Our Free Tier!

Free Tier includes:
G3.2GB Cloud VPS a Free to Use for One Year
50 GB of Block Storage Free to Use for One Year
50 GB of Snapshots Free to Use for One Year