Verified and Tested 03/23/2015

Introduction

In this guide, we will be reviewing the basic configuration options on first initializing your cPanel & WHM server. It will review some basic areas that may need to be customized by you to get the full experience and your needs out of cPanel & WHM.

Prerequisites

A newly provisioned Cloud CentOS 6.7 cPanel & WHM server. If you don’t already have a server, consider a centos server with WHM from Atlantic.Net.

Initial Configuration of cPanel & WHM on CentOS 6.7

Once you have your cPanel & WHM server provisioned, you will want to log into the server. Upon fresh log in, you should be presented with an End User Agreement license page like the below. After review, click on the blue button “I Agree/Go to Step 2”

Accept License Agreement

License Agreement

 

 

On this next page, you will be prompted to set up networking. The first section on this page is the Contact information. This is information so the server knows how to contact you should something go wrong. This section looks like the below and the areas 1, 2, 3, and 4 are described as follows:

Fill in Contact information, SMS address, AIM Name and ICQ Number accordingly.

Contact Information

 

1. “Server Contact Email Address” – This first area is the server contact email address. This would be the email address the server will email should anything go wrong. It is recommended that you insert a contact address for yourself that you check often. This is a required field.

2. “Server Contact SMS Address” – This is an optional field for putting in a phone or pager email that is capable of receiving SMS.

3. “Server Contact AIM Name” – This is an optional field for using an AIM username for the server to message. It will prompt you for a username and password should you enable this.

4. “Server Contact ICQ Number” – This is an optional field for an ICQ number. It will ask you for the number and password should you enable this.

 

The next section is the Hostname section which defaults to the below image. For this field, you DO NOT want to use your base domain/website. You will want to use a subdomain of your domain. Something like “server1.domain.tld” or “webserver.domain.tld” where domain.tld is your domain/website. If you do not have a domain, you may make up/create a subdomain but please note that this value will never resolve if there are no DNS records for it. As an additional note, please use a value here that you either have or will create an A record or other type of DNS record for. This will allow you to easily access your server by using that subdomain.

Set your servers FQDN

Hostname

 

The third section on this page is for Resolvers. These are important as they handle how your server will resolve traffic and where it will go to do so. These should be left at the default value of 209.208.127.65 and 209.208.25.18. There is not a third resolver for our servers to use.

Input primary and secondary DNS servers

Resolvers

The last section is the Main Network Device. This field should also be left as the default value, as eth0 is the main network device. Once done, you can click on “Save & Go to Step 3.”

Select primary network interface.

Ethernet Device

 

 

The next page will be the “Setup IP Addresses” page. You do not have to do anything here unless you have already reserved and assigned an additional IP to this server. If you have not, you may just click “Skip This Step and Use Default Settings.” If you have an additional IP address simply add it to the field and click “Add IP(s)”.

Input IP addresses for which you will be hosting

Setup IP Address

 

 

The next page will bring you directly to a Nameservers page. The first box here is Nameserver Configuration. It is important to note that if you are NOT using your server to host your own private or public DNS, you should choose the option “Disabled.” If you are using your own nameservers, pick the nameserver option that best applies to you. In most cases, the default BIND will work for your needs.

If you chose to host your own DNS, select a DNS server to utilize.

Name Server

 

After this, there is a section for choosing the nameservers that domains on this server will use. If you have your own nameservers for use, you would put these here. DO NOT leave the default values. If you are using our Cloud DNS for your domains, you will want to use ns1.quickroutedns.com and ns2.quickroutedns.com as the picture below shows.

Select the authoritative DNS servers for your domain.

Authoritative DNS

The next section you should leave as is and just click on the “Save & Go to Step 5.”

 

 

The next page deals with FTP, mail, and cPHulk services. The first section for FTP, you can leave as the default which is set to Pure-FTPD. If you’d rather use ProFTPD you may do so. If you do not need FTP, you may disable it, but if you plan to upload files it would be best to pick between Pure and Pro FTPD.

Select your preferred FTP server.

FTP Configuration

 

The next section deals with email and what you want to use for your mail on the server. If you wont be using email, you can disable this, otherwise the default Dovecot is a great choice. You may use Courier if you prefer. There’s also the check box for Convert Mailbox Format. You can leave this checked and is only in play if you are migrating email from another server.

Select your preferred MDA

Mail Configuration

 

The next sections deal with cPHulk and Perl Modules. cPHulk is brute force protection built into cPanel & WHM. It’s a great idea to enable this and leave it on the default. Remember to add your IP to the whitelist for the service once this configuration is done. The common set of perl modules is used if you will be using perl modules that reference /usr/bin/perl. Otherwise it is not needed. You can click on “Save & Go to Step 6” when done here.

Enable cPHulk brute force protection.

cPHulk

 

 

The last page is for Quotas. This page lets you determine if you want to use quotas or not. If you do not, you can not keep track of website’s quotas or email quotas. Once you make your decision, simply click “Finish Setup Wizard” and we are done with the initial setup. This will bring you to the next page called Feature Showcase.

Chose your quote enforment preference.

Quotes

 

 

 

The first section on the Feature Showcase page deals with Recommended Features. It’s recommended to keep these enabled but it is your choice.

Recommended Features

Recommended Features

 

 

After that is the New Features list. These are features you can enable or opt out of. They mainly deal with email. If you would like email clients to store a copy of messages, turn on the Archiving. If you would like users to be able to use Auto Discovery in their mail client for email settings, enable the Auto Discovery option. Query Apache for “nobody” senders is one that we highly recommend is enabled. This will allow you to more easily track down compromised email accounts. We also recommend the SMTP Restrictions options to block compromises. Trust X-PHP-Script should only be used if you’re positive no one on your system will be sending or being compromised. This should rarely be enabled. Once done, click the “Save Settings” button and that will complete all of the configuration necessary to start using cPanel & WHM.

You may chose to enable or disable any neeew features offered by WHM.

New Features