How to Install ELK Stack on Debian 8

Eric Izoita
by Atlantic.Net (1posts) under Cloud Hosting


The ELK stack is a popular set of tools consisting of Elasticsearch, Logstash, and Kibana. These three tools form a software stack that can function as an extremely powerful centralized network data analytics and server log visualization tool. The ELK stack is also designed to be very capable of scaling out across multiple servers for load balancing. In this how-to we will be installing all components of the ELK stack onto a single server.


  • A server running Debian 8. If you do not have a server already, offers reliable cloud hosting servers you can spin up in under 30 seconds.

Other operating systems are supported, but this article concentrates on Debian 8.

Installing ELK Stack on Debian 8


Doing work as the root user is generally discouraged from a security standpoint. Using sudo allows you to execute commands that require root privileges from a non-root user. By default, Debian does not include the sudo package, so we’ll be installing it.

apt-get install sudo

You will then need to add the standard user account to the sudo group that you want to be able to execute root privilege commands. Replace <username> with the username of the account.

adduser <username> sudo

Log out and log back in with your new user, and we can continue.

The first time you use sudo in a session will prompt you for the current user’s password.

Installing Elasticsearch

Let’s start off the process by installing Java on our server.

Elasticsearch, the data indexing and search component of the ELK stack, requires Java to run. We’ll be installing the OpenJDK 7 release, however, you can install any JRE listed on the support matrix for Elasticsearch.

First, we will need to update the package lists on our server.

sudo apt-get update

Now we can install the JRE.

sudo apt-get install openjdk-7-jre

This installation may take a while as there are a lot of dependencies for APT to sort through.

Once that has finished, we can install Elasticsearch. The version of Elasticsearch in the official Debian repositories is very old and not supported by newer versions of Kibana, so we are going to add the repository to our server and install Elasticsearch from there.

Download and install the repository signing key for

wget -qO - | sudo apt-key add -

Next we can add the repository to the /etc/apt/sources.list.d/ directory.

echo "deb stable main" | sudo tee -a /etc/apt/sources.list.d/Elasticsearch-2.x.list

At this point we need to update the package lists again, which will add the newer version of Elasticsearch from the repository to the package lists.

sudo apt-get update

Now, we can install Elasticsearch.

sudo apt-get install elasticsearch

We will also need to configure the Elasticsearch service to launch on system startup.

sudo systemctl daemon-reload
sudo systemctl enable elasticsearch.service

That’s it! Now you can start the Elasticsearch service.

sudo systemctl start elasticsearch.service

And ensure that it is active.

systemctl status elasticsearch.service

Elasticsearch Configuration

In our case it is not necessary, but if you will have Kibana and Elasticsearch running on different servers (as many ELK deployments do), then you will need to edit the Elasticsearch config file, /etc/elasticsearch/elasticsearch.yml on the Elasticsearch server, and add the following two lines anywhere in the file:

http.cors.allow-origin: "/.*/"
http.cors.enabled: true

To the same file, add a line to name the Elasticsearch cluster. The default name is elasticsearch. elasticcluster
Editing the Elasticsearch configuration file

Editing the Elasticsearch configuration file

Be sure not to add any blank lines or spaces to the configuration file, as YAML files are whitespace sensitive.

And then restart the Elasticsearch daemon.

sudo systemctl restart elasticsearch.service

Once again, ensure that the daemon is running successfully.

systemctl status elasticsearch.service
Elasticsearch service status

Elasticsearch service status

Installing Logstash

We can install Logstash, the log shipping and transformation component of the ELK stack, in very much the same way as Elasticsearch.

If you have been following this how-to, you will already have added the package signing key. Thus we can skip that part and immediately add the logstash repository to our /etc/apt/sources.list.d/.

echo "deb stable main" | sudo tee -a /etc/apt/sources.list

And, of course, update the package lists.

sudo apt-get update

Next, we can install Logstash.

sudo apt-get install logstash

As with Elasticsearch, we will need to enable Logstash at system startup.

sudo systemctl daemon-reload
sudo systemctl enable logstash.service

Now we can start Logstash.

sudo systemctl start logstash.service

And ensure that it is running.

systemctl status logstash.service

Now we can move on to configuring it!

Logstash Configuration

Logstash uses configuration files located in /etc/logstash/conf.d. We will need to create three new files in that directory since there is no default configuration.

cd /etc/logstash/conf.d
sudo touch 01-input.conf 10-syslog.conf 30-lumberjack-output.conf

We will use the first file, 01-input.conf, to specify how Lumberjack will listen for incoming logs.

Open the file for editing (substituting the text editor you prefer, if you have a preference).

sudo editor 01-input.conf

Add the following block:

input {
  lumberjack {
    port => 5000
    type => "logs"
    ssl_certificate => "/etc/ssl/certs/logstash-forwarder.crt"
    ssl_key => "/etc/ssl/logstash-forwarder.key"

Save and close the file.

Don’t worry about the SSL certificates quite yet. We will be generating them shortly.

Next, we need to add a filter configuration to 10-syslog.conf. A filter can match against incoming messages (logs) and apply transformations to the data before indexing them in Elasticsearch.

Open the file in your editor,

sudo editor 10-syslog.conf

and add the following:

filter {
  if [type] == "syslog" {
    grok {
      match => { "message" => "%{SYSLOGTIMESTAMP:syslog_timestamp} %{SYSLOGHOST:syslog_hostname} %{DATA:syslog_program}(?:\[%{POSINT:syslog_pid}\])?: %{GREEDYDATA:syslog_message}" }
      add_field => [ "received_at", "%{@timestamp}" ]
      add_field => [ "received_from", "%{host}" ]
    syslog_pri { }
    date {
      match => [ "syslog_timestamp", "MMM  d HH:mm:ss", "MMM dd HH:mm:ss" ]

This filter intercepts any incoming logs that match the standard syslog format, and then adds a timestamp and hostname field to each message. It also extracts some information from the log message such as the syslog PID, which program generated the message, and the syslog message itself.

A new filter will need to be written for every new type of log you want to use with Logstash/Elasticsearch.

Finally, we can go to our output configuration file, 30-lumberjack-output.conf. This file will contain a simple output block specifying that indexed messages should be sent to Elasticsearch, and the cluster name.

Open the file in your editor.

sudo editor 30-lumberjack-output.conf

Add the following block:

output {
  elasticsearch {
    hosts => ["localhost"]

Now we’ll get to generating the SSL certificates for your ELK stack.

Generate SSL Certificates

The Lumberjack protocol that Logstash uses to communicate log messages is designed to be secure from end to end, and SSL is a hard requirement. Don’t worry, though, it is quite simple to generate the certificates.

Because we are using an IP address rather than a hostname for the servers directive in /etc/logstash-forwarder.conf, we will need to add an IP SAN field to the generated SSL certificate. Include one by adding a subjectAltName line to the OpenSSL config file, /etc/ssl/openssl.cnf.

sudo editor /etc/ssl/openssl.cnf

Locate the line containing [ v3_ca ], and insert the following line under it. (Replace the with the IP address of your Logstash server, if Logstash is installed on a separate server.)

[ v3_ca ]
subjectAltName = IP:

Save and close the file. We can now generate the SSL certificate.

sudo openssl req -x509 -batch -nodes -newkey rsa:2048 -keyout /etc/ssl/logstash-forwarder.key -out /etc/ssl/certs/logstash-forwarder.crt

sudo chown logstash:logstash /etc/ssl/logstash-forwarder.key
sudo chmod 600 /etc/ssl/logstash-forwarder.key

Now, restart logstash and check if it has started correctly.

sudo systemctl restart logstash.service
systemctl status logstash.service
Logstash service status

Logstash service status

Even if it has started, check the log files at /var/log/logstash/logstash.* and ensure that there are no errors during startup.

Installing Logstash-Forwarder

Now that we have installed the server-side component of Logstash, we need to install the Logstash-Forwarder client on every server whose logs you want to monitor.

In this tutorial, we will be installing Logstash-Forwarder on the same server running the rest of ELK, but normally Logstash-Forwarder would run on other servers.

First, we will once again need to add a new repository to the system.

echo "deb stable main" | sudo tee -a /etc/apt/sources.list.d/logstash-forwarder.list

And, again, update the package lists.

sudo apt-get update

Now, we can install Logstash-Forwarder.

sudo apt-get install logstash-forwarder

After the install is complete, open the configuration file for Logstash-Forwarder.

sudo editor /etc/logstash-forwarder.conf

Erase the existing default configuration, and add the following block:

  "network": {
    "servers": [ "" ],
    "timeout": 15,
    "ssl ca": "/etc/ssl/certs/logstash-forwarder.crt"
  "files": [
      "paths": [ "/var/log/syslog", "/var/log/auth.log" ],
      "fields": { "type": "syslog" }

This configuration will check /var/log/syslog and /var/log/auth.log for new entries and then will tag each outgoing message from those files with syslog in the type field.

If you are installing Logstash-Forwarder on a separate host, be sure to change the servers directive to include the IP address of the remote server. Also, ensure that you copy the SSL certificate file to the correct location on the remote server.

Now, we will enable Logstash-Forwarder on boot.

sudo systemctl daemon-reload
sudo systemctl enable logstash-forwarder.service

Finally, we can restart the Logstash-Forwarder service to apply the configuration changes.

sudo systemctl restart logstash-forwarder.service

If the daemon starts okay, we can move forward to setting up Kibana and getting the full ELK stack up and running.

systemctl status logstash-forwarder.service
Logstash-forwarder service status

Logstash-forwarder service status

To check if logstash-forwarder is working, watch the log file for events being processed.

tail -f /var/log/logstash-forwarder/*
Logstash-Forwarder log files

Logstash-Forwarder log files

Installing Kibana

Unfortunately, as of the writing of this article, does not offer any packaged versions of Kibana, leaving daemon management to the user. We will need to create a systemd service file and manually install Kibana.

Navigate to the /opt directory and download Kibana.

cd /opt
wget -qO - | sudo tar -xzf -

We will need to create a new user for Kibana to run as and set ownership of the program directory.

sudo useradd kibana
sudo chown kibana:kibana kibana-4.3.0-linux-x64/ -R

Following this step, we can create the systemd service file.

sudo touch /usr/lib/systemd/system/kibana.service

Add the service definition to the file.

sudo editor /usr/lib/systemd/system/kibana.service


# Connects standard error to journal


We now need to reload all systemd units, and then enable the Kibana service.

sudo systemctl daemon-reload
sudo systemctl enable kibana.service

Now, we can start Kibana.

sudo systemctl start kibana.service

Double check to make sure it is running, and we are off!

systemctl status kibana.service
Kibana service status

Kibana service status

Kibana Configuration

The main Kibana configuration file will be located at /opt/kibana-4.3.0-linux-x64/config/kibana.yml. The default options should suffice for this how-to, but you can change the settings as needed for your configuration.

Navigate to your server’s IP address in a web browser, at port 5601, to access the Kibana initialization page. Kibana will ask you to configure an index pattern; select received_at for the time-field name and press Create.

Create an Index pattern in Kibana

Create an Index pattern in Kibana

That’s it! Your ELK stack components–Elasticsearch, Logstash, and Kibana–are installed and operational.

Where To Go Next

Thank you for following along on for this tutorial on installing the ELK stack on Debian 8. Please check back with us again for related articles, and to test drive one of our blazing-fast cloud servers.

Related Posts

New York, NY

100 Delawanna Ave, Suite 1

Clifton, NJ 07014

United States

Dallas, TX

2323 Bryan Street,

Dallas, Texas 75201

United States

San Francisco, CA

2820 Northwestern Pkwy,

Santa Clara, CA 95051

United States

Orlando, FL

440 W Kennedy Blvd, Suite 3

Orlando, FL 32810

United States

London, UK

14 Liverpool Road, Slough,

Berkshire SL1 4QZ

United Kingdom

Toronto, Canada

20 Pullman Ct, Scarborough,

Ontario M1X 1E4



We use cookies for advertising, social media and analytics purposes. Read about how we use cookies in our updated Privacy Policy. If you continue to use this site, you consent to our use of cookies and our Privacy Policy.