Verified and Tested 02/28/2015

Introduction

This how-to will show you how to add an additional IP address to Windows Sever 2012. Many services on a server might ask for or require additional public IP address to work correctly, such as creating private name servers, websites with SSLs, email generation, splitting services to different public IPs.

Prerequisites

You must first reserve and assign an additional public IP to your Windows Server 2012. For that guide, please visit https://www.atlantic.net/community/howto/add-additional-public-ip-atlantic-net-cloud-server/

Adding an additional Public IP address to Windows Server 2012

Now, you want to log into your server. Open up the Networking and Sharing Center so we can edit the Network Interface. For that guide, please visit https://www.atlantic.net/community/howto/open-network-sharing-center-windows-server-2012/

Make sure to click on “Change adapter settings” if you have not done so already.

In network and sharing center select change adapter settings

Change adapter settings

Click on Local Area Connection. Notice it highlights blue and adds some options in the above line. Let’s click on “Change settings of this connection”.

Under network connections, select your adaptor and select Changes ettings of the connection.

Control Panel : Network Connection

Now double click on “Internet Protocol Version 4 (TCP/IPv4)”. If you do not like to double click, then just select it and click “Properties”.

Select Internet Protocol Version 4 (TCP/IPv4)

Internet Protocol Version 4 (TCP/IPv4)

Since this is an additional IP address, we are going to click on “Advanced”

In Internet Protocol Version 4 (TCP/IPv4) Properties select Advanced

Internet Protocol Version 4 (TCP/IPv4)

We are almost done. Now under the top section “IP addresses” click “Add…”.

Under IP Setting tab, select ADD

IP Settings

Now, we are going to use the info that was provided in the Public IP section for the IP we reserved and Assigned.

Manage Additional IPs

Manage Additional IPs

IP Address

IP Address

Press OK four times to return you to the Network Connections screen. Now, you can check to see if it is configured correctly. Right click on Local Area Connection, click on Status, Click on Details…, and look at the multiple IPv4 Addresses and the Subnet mask for each one.

Right click on Local Area Connection, click on Status, Click on Details…, and look at the multiple IPv4 Addresses and the Subnet mask for each one.

Status